*** Buy one, get one 30% off any mix of pullers and presses (applies to individual tools only, not kits) ***
Hope PF41 and PF46 press-fit bottom brackets feature a threaded sleeve that must be screwed in using a large 25 or 31mm hex key.
Our tool clicks on to standard 1/2” socket ratchet handles. If you don’t own a 1/2” ratchet then chose the optional adaptor; it’s a square bar held in place with simple o-rings, which allows a 1/2” spanner or adjustable spanner to be used to turn the hex instead of a ratchet.
There are two sizes of tool. One fits bottom brackets for 24mm (BB24) axle cranks (Shimano etc) and the other fits 30mm (BB30) axle cranks (SRAM etc). Select the correct tool from the drop down menu according to the crank/bottom bracket type you have. Use the second drop down menu to select a spanner adaptor, if you don’t own a 1/2” ratchet handle.
We aim to dispatch all orders within 1 working day
Orders within the UK will be shipped by Royal Mail RM24 (First Class)
International orders are welcomed and will be shipped by Royal Mail International Standard (Airmail). Delivery times vary but are typically 2-3 days within Europe and 5-10 days worldwide
Ourtools can be selected either by the bearing size or by the bearing's standard reference code.
Standard references take the form of a three or four digit number, such as 688, or 6902 for example. These codes are often moulded onto the bearing's seal. You might see something like 6902-2RS on the seal. The first digits are the standard reference. The second part (2RS in this case) refers to the seal type and doesn't matter for tool selection.
Alternatively, tools can be selected by their inside (ID) and outside (OD) diameters and width.
Note that each tool is specific to one bearing size and can’t be used on bearings with different dimensions.
If you need any help then please feel free to email us.