Precision Slitting Saw Arbor

We couldn't find high quality slitting saw arbours that met our needs, so we decided to make our own!

Manufactured from 303 stainless steel.

Dimensions:

• Saw hole diameter: 13mm or 16mm (select in menu above)
• Clamp diameter 23.5mm
• Shank diameter 13mm
• Overall length 77.5mm
• Shank length 36mm
• Cap projection 12mm from saw

Our tools can be selected either by the bearing's dimensions or by the bearing's standard reference code.

Standard references take the form of a three to five digit number, such as 688, or 6902 for example.  These codes are often provided in the bike's user manuals, or moulded onto the bearing's seal. You might see something like 6902-2RS on the seal. The first digits are the standard reference.  The second part (2RS in this case) refers to the seal type and doesn't matter for tool selection.

While the letter & numbers after the baring ref usually refer to the type of seal, you should keep an eye out for the suffix 'E', for example 698-E.  This denotes that the inner race of the bearing is extended, which will affect puller and press selection. 

Alternatively, tools can be selected by their inside (ID) and outside (OD) diameters and width (W). 

Note that each tool is specific to one bearing size and can’t be used on bearings with different dimensions.

If you need any help then please feel free to email us!  We usually reply within 1 working day.